Shaanxi High-end Industry &Trade Co., Ltd.
Commit to Qualified Products & Service in Nonferrous Metal Supply. AS9100& Norsok M650 qualified factory.
|Place of Origin:
|MADE IN CHINA
|AS9100 and NORSOK M650 qualified
|ASTM B381 F12
|Minimum Order Quantity:
|100 tons per month
|F12 Ti-0.3Mo-0.8Ni Grade 12
|Phase Transformation Point:
0.3Mo 0.8Ni Titanium Plate,
Gr12 Titanium Plate,
Gr12 forged steel block
Ti Alloy Forged Block ASTM B381 F12 Ti-0.3Mo-0.8Ni Grade 12 Titanium Alloy Plate
GR12 / TA10(Ti-0.3Mo-0.8Ni) titanium alloy is a kind of corrosion resistant titanium alloy, which is developed to improve the crevice corrosion property of pure titanium.
The alloy contains 0.3%Mo and 0.8%Ni, which not only strengthens the alloy, but also has good crevice corrosion resistance to high temperature, low pH value chloride or weak reducing acid.The corrosion resistance is better than that of pure titanium and close to that of TA9 alloy.
GR12 /TA10 alloy also has good process plasticity and welding properties, and has been widely used in chemical industry.The alloy can be used under annealing condition, and its main products are sheet, bar, pipe, forgings and wire, etc.Foreign similar brand Gr.12 (United States).
Corrosion resistance: Nickel improves the crevice corrosion resistance of titanium in hydrochloric acid solution, but in the reducing acid, the corrosion resistance of Ti-Ni alloy is lower than that of pure titanium.Appropriate addition of molybdenum to Ti-Ni alloy can improve its corrosion resistance in reducing medium.
Titanium forgings by YIXIN Titanium are known as ‘Sponge only,no scrap material ’ since the application by its end user--Subsea, Oil& Gas, Aerospace,Military and Medical industries. It has high requirment for the material itself ,process control and traceabilities.This Ti-Mo-Ni alloy material is good for its corrosion resisitance.It produced as per client drawings.
|4.54g/cm3 ; compared with steel (7.89g/cm3)
|Phase transformation point
Contact Person: admin